MIG Narrow Gap Welding „SPAce“

The spa Narrow Gap Welding System “SPAce” is also equipped like the previous type with a Protection Cap made out of high quality Boron Nitride Ceramic. This ceramic material is current insulating, extremely heat- and thermal shock resistant with excellent spatter repelling properties. The Current Contact Tip as well as the Current Contact Tube is coated with a heat resistant Boron Nitride Ceramic which excludes a possible short arc. Because of the new “slim” design of the Gas Nozzle the work-piece accessibility could be improved again. The Gas Nozzle is also coated with a spatter repelling coating.

Improved view of welding seam
Improved root welding and root quality. A far smaller chamfer angle of <60° can be achieved.
Therefore a smaller cross-section of weld seam results in a lower consumption of filler material and of course less labor.
Significant reduction of harmful spatter because of the coating and the Boron Nitride Ceramic
Obviates the need of expensive and toxic anti stick sprays and pastes
Short circuits while welding narrow gaps are reduced to zero

SPA Narrow-Gap-Welding-Systems “SPAce” are available in different designs and for almost any application. Standard welding joint depths are 60 mm up to 150 mm. Standard System is modified for SB 401/501. Special lengths as well as modification for other torch types are possible.

Settings water cooled torches:
For ø 1.2mm Wire Electrode; Wire feed 8.0 to 8.5m/min; ca. 26.0 to 27.0 Volts is equivalent to 260A to 280A

For ø 1.0mm Wire Electrode; Wire feed 10.5 to 11.0m/min; ca. 25.0 to 26.0 Volts is equivalent to 220A to 230A

Gas cooled Torches:
For ø 1.0mm Wire Electrode; Wire feed 6m/min; ca. 19.0 Volts is equivalent to ca. 160A

Do you have questions regarding our Narrow Gap Welding Systems MIG “SPAce”? Then contact us – we would be glad to help you out!